Before returning to the compressor refrigeration cycle system, when the refrigerant must complete gasification.So before the refrigerant entering the compressor must separate the gas and liquid, gas liquid refrigerant entering the compressor does not happen cause the compressor;Slowly from the liquid refrigerant in the separator, after waiting for evaporation into the compressor.In order to make the remaining frozen oil back to the compressor in the system, at the bottom of the muffler in the accumulator is equipped with oil return hole, the remaining frozen oil will be returned to the compressor with gas refrigerant.With the protection of the gas-liquid separation, the life of the compressor will be more durable and cyclic operation of the system to function.

• U-bend design ensures maximum refrigerant flow and intercept the least oil. 

• Into the fluid with the u-bend tube guide stagger, prevent the liquid refrigerant entering the compressor directly. 

• Surface coated with corrosion resistant epoxy powder coating. 

• Apply refrigerant R22 / everything/R404A/R404C/r114 / R507. 

• Maximum working pressure 3OBar.

In the refrigerating capacity of the evaporation temperature,

• R22:[-18°C:45; 5°C:101.3]; 

• R134a:[-18°C:25.7; 5°C:59.8]; 

• R404A:[-18°C:37.6; 5°C:64]; 

• ODF:1-5/8;

• Overall dimensions(mm) D:159; A:42; L:42; H:572; d*h/M:M12; 

• Cubage:9.5L;