Pressure Range: 3P.S.I~700P.S.I； Settings P.S. Open: 10 ；Close: 20 ；Setting Tolerance: Open: +/-5 ；Close: +/-5 ；Additional： Low Pressure Automatic Reset

Pressure Range: 3P.S.I~700P.S.I； Settings P.S. Open: 5 ；Close: 20 ；Setting Tolerance: Open: +/-5 ；Close: +/-5 ；Additional： Low Pressure Automatic Reset

The Liquid Flow Switches are single-Pole, Double-Throw (SPDT) flow switches that are used in liquid lines carrying water, ethylene glycol, or otherliquids not classified as hazardous.they can be wired to energize one device and de-energize another device powered from the same source when liquid flow either exceeds or drops below the set flow either exceeds or drops below the set flow rate.

Note: The Flow Switch Cannot be used where the liquid in the pipes will drip below the liquid’s freezing point, causing an internal freeze-up.

IMPORTANT:Flow Switches are designed for use ONLY as operating controls. Where an operating Control failure would result in personal injury and/or loss of property, it is the responsibility of the installer to add devices (safety, limit controls)or systems(alarm, supervisory systems)that protect against or warn of control failure.

The Liquid Flow Switches are single-Pole, Double-Throw (SPDT) flow switches that are used in liquid lines carrying water, ethylene glycol, or otherliquids not classified as hazardous.they can be wired to energize one device and de-energize another device powered from the same source when liquid flow either exceeds or drops below the set flow either exceeds or drops below the set flow rate.

Note: The Flow Switch Cannot be used where the liquid in the pipes will drip below the liquid’s freezing point, causing an internal freeze-up.

IMPORTANT:Flow Switches are designed for use ONLY as operating controls. Where an operating Control failure would result in personal injury and/or loss of property, it is the responsibility of the installer to add devices (safety, limit controls)or systems(alarm, supervisory systems)that protect against or warn of control failure.

A compact surge suppressor offering better surge protection levels.

50kA Maximum Surge Current, 120/240V AC Voltage Rating, 1-phase, 3-wire (isolated ground), NEMA 4X Enclosure Rating.

• BEST PROTECTION: Protects against high and low voltage, brownout, spike, instant surge, power failure, voltage fluctuation and load shedding. The shell is made from PC flame retardant material. It can take full care of your home appliances.

• USAGE: Suitable for Air Conditioners, TV, Refrigerator, Audio，Freezers, Ice Makers, Washing Machines or any Small Appliances(Home Appliance which power is less than 1440W). Note:The total power of connected electrical equipment shall not exceed the rated power.

• 4 LED INDICATORS: Light indicators for Normal Voltage, Over Voltage, Low Voltage and Waiting Cycle. 4 Mode Led Indicator can let you know the power status of your home appliances in a simple and clear way. Directly Plug In Design—Easy to use.

• SAFETY: Once the voltage returns to normal, the SAFETY CYCLE will light up before it turns to green, the green light will turn on which will allow the current to flow while waiting for around 3 minutes

• WORRY-FREE SHOPPING: LT is manufacturer and the design of intelligent electronic and electrical products. We listen to each customer's voice. When you meet any questions, please feel free to tell us to help you solve problems.

• BEST PROTECTION: Protects against high and low voltage, brownout, spike, instant surge, power failure, voltage fluctuation and load shedding. The shell is made from PC flame retardant material. It can take full care of your home appliances.

• USAGE: Suitable for Air Conditioners, TV, Refrigerator, Audio，Freezers, Ice Makers, Washing Machines or any Small Appliances(Home Appliance which power is less than 1440W). Note:The total power of connected electrical equipment shall not exceed the rated power.

• 4 LED INDICATORS: Light indicators for Normal Voltage, Over Voltage, Low Voltage and Waiting Cycle. 4 Mode Led Indicator can let you know the power status of your home appliances in a simple and clear way. Directly Plug In Design—Easy to use.

• SAFETY: Once the voltage returns to normal, the SAFETY CYCLE will light up before it turns to green, the green light will turn on which will allow the current to flow while waiting for around 3 minutes

• WORRY-FREE SHOPPING: LT is manufacturer and the design of intelligent electronic and electrical products. We listen to each customer's voice. When you meet any questions, please feel free to tell us to help you solve problems.
  

AL Series Sequencer, field proven for controlling the operation of heating elements and/or blower motors in electric, gas or oil heat systems. This sequencer has 1 switch & turns on at 1-60 seconds, and off at 1-45 seconds.

AL Series Sequencer, field proven for controlling the operation of heating elements and/or blower motors in electric, gas or oil heat systems. This sequencer has 2 switches & turns on at 1-60 and off at 1-45 seconds.